Desanders And Desilters For Drilling Mud, HDD, Mining And Water-Well
Desilters and Desanders are used to process large volumes of drilling fluid to remove abrasive sands and silts that shale shakers cannot remove.
As a solids control equipment of the second and third stages in the drilling operation, desander and desilter are used to remove harmful solid particles of 19-74µm in drilling liquid. Suspending particles can be separated from the liquid under the centrifugal acceleration, by the use of the working principle of centrifugal subsidence.
Built on API RP 13C, with the certificate of authority to use the official API monogram.
Desander and desilter are important equipment for drilling liquid-solid control. It is mainly used for the second phase purification of drilling liquid. It removes nocuous solid, stabilizes drilling liquid properties, and improves drilling efficiency. The hydrodynamic cyclone of the desander is made of wear-resistant cast iron. It is reliable, effective, and serves long. The content of sand after the desander is controlled below 0.15%.
Features:
- Versatile Deal with weighted or un-weighted drilling fluid.
- Environmentally efficient Removing and drying drilled solids help meet environmental regulations by minimizing waste generated and reducing disposal costs.
- Minimizes maintenance Continuous removal of sand and abrasive cuttings from drilling fluid cuts downtime and reduces repair and replacement of worn parts on downstream equipment.
- A wide range of desanders for your drilling-fluid system Aipu desanders is available in a variety of configurations.
- Work oil-based or water-based mud both Our desanders are designed to work with either oil-based or water-based weighted muds, as well as with either dispersed or non-dispersed muds.
Benefits:
- Design: Adopt ANSYS limited element analysis to optimize the structure.
- Material: Use Q235B from BAOSTEEL for the body, and High strength compound rubber material used to reduce shock.
- Vibration motor: Italy OLI /American Martin, or according to customer requirement.
- Electrical control system: Explosion-proof electrical control system with electrical components as ABB, Siemens, Schneider
- Treatment: Grinding, Abrasive blasting, Epoxy zinc-rich primer, Intermediate painting with epoxy micaceous iron, and Finish painting with polyurethane
- Hydrocyclone cone: Made of wearing-resist polyurethane and in the structure similar to design.
- Inlet and outlet: Fast joint connection.
Aipu's Desander is an economical and practical desanding device. It is used as the second stage of the solids control system, separates solid particles' next stage equipment.
Specifications
| Model |
APCS120/240/360 |
APCS120/240-M |
APCS240/360-D3 |
APCS240/360-MG4 |
| Capacity (m³/h) |
120/240/360 |
120/240 |
240/360 |
240/360 |
| Desander Cone |
10" |
| Cone Qty |
1 Pcs/2 Pcs/3 Pcs |
| Working Pressure |
0.25-0.4Mpa |
| Separation Point |
47-76 Microns |
| Inlet |
6" |
| Outlet |
8" |
| Bottom Shaker |
Model |
N/A |
Hunter Mini |
Hunter D3 |
Hunter MG4 |
| Vibration Mode |
Linear Motion |
| Vibrator Motor |
2×0.75Kw |
2×1.72Kw |
2×1.72Kw |
| G Force |
≤7.5G |
| Deck Angle |
2° |
-1 - +5° |
| Screen Area |
1.35㎡ |
2.27㎡ |
2.73㎡ |
| Screen Panel |
2 Pcs |
3 Pcs |
4 Pcs |
Dimension
(mm) |
2150×1000×1900 |
1680×1760×1850 |
2400×2000×2200 |
2640×2100×2200 |
Weight
(Kg) |
450/500/550 |
1050/1140kg |
1800/1890 |
1900/1990 |
Video:
Product Tags:
|
|
380v 460v API RP 13C Drilling Mud Cleaning Equipment Images
|
